LTM4612
PIN FUNCTIONS
(See Package Description for Pin Assignments)
V IN (Bank 1): Power Input Pins. Apply input voltage be-
tween these pins and PGND pins. Recommend placing
input decoupling capacitance directly between V IN pins
and PGND pins.
PGND (Bank 2): Power Ground Pins for Both Input and
Output Returns.
V OUT (Bank 3): Power Output Pins. Apply output load
between these pins and PGND pins. Recommend placing out-
put decoupling capacitance directly between these pins and
GND pins (see the LTM4612 Pin Configuration below).
V D (Pins B7, C7): Top FET Drain Pins. Add more capa-
citors between V D and ground to handle the input RMS
current and reduce the input ripple further.
DRV CC (Pins C10, E11, E12): These pins normally connect
to INTV CC for powering the internal MOSFET drivers. They
can be biased up to 6V from an external supply with about
50mA capability. This improves efficiency at higher input
voltages by reducing power dissipation in the module.
INTV CC (Pin A7): This pin is for additional decoupling of
the 5V internal regulator.
PLLIN (Pin A8): External Clock Synchronization Input to the
Phase Detector. This pin is internally terminated to SGND
with a 50k resistor. Apply a clock above 2V and below
INTV CC . See the Applications Information section.
TOP VIEW
FCB (Pin M12): Forced Continuous Input. Connect this pin
to SGND to force continuous synchronization operation at
low load, to INTV CC to enable discontinuous mode opera-
tion at low load or to a resistive divider from a secondary
output when using a secondary winding.
TRACK/SS (Pin A9): Output Voltage Tracking and Soft-Start
Pin. When the module is configured as a master output,
then a soft-start capacitor is placed on this pin to ground
to control the master ramp rate. A soft-start capacitor can
be used for soft-start turn-on as a standalone regulator.
Slave operation is performed by putting a resistor divider
from the master output to the ground, and connecting the
center point of the divider to this pin. See the Applications
Information section.
MPGM (Pins A12, B11): Programmable Margining In-
put. A resistor from these pins to ground sets a current
that is equal to 1.18V/R. This current multiplied by 10k
will equal a value in millivolts that is a percentage of the
0.6V reference voltage. May be left open if margining is
not desired. See the Applications Information section. To
parallel LTM4612s, each requires an individual MPGM
resistor. Do not tie MPGM pins together.
f SET (Pin B12): Frequency Set Internally to ~850kHz to
900kHz at 12V Output. An external resistor can be placed
from this pin to ground to increase frequency. See the
Applications Information section for frequency adjustment.
C
BANK 2 F
A
V IN B
BANK 1
D
E
PGND
G
H
J
V OUT K
BANK 3 L
M
V D
SGND
f SET
MARG0
MARG1
DRV CC
V FB
PGOOD
SGND
NC
NC
NC
FCB
1 2 3 4 5 6 7 8 9 10 11 12
LGA PACKAGE
133-LEAD (15mm × 15mm × 2.8mm)
LTM4612 Pin Configuration
4612fb
7
相关PDF资料
LTM4613MPV#PBF IC UMODULE DC/DC 8A 133-LGA
LTM4614IV#PBF IC UMODULE DC/DC DUAL 4A 144LGA
LTM4615IV#PBF IC SWIT REG BUCK 4A ADJ 144LGA
LTM4618IV#PBF IC DC-DC UMODULE BUCK 6A 84-LGA
LTM4619IV#PBF IC SWIT REG BUCK 4A ADJ 144LGA
LTM4627MPY#PBF IC DC/DC UMODULE 15A 133-BGA
LTM4628EV#PBF IC DC/DC UMODULE 16A 144-LGA
LTM8008HV#PBF IC DC/DC UMODULE 16-LGA
相关代理商/技术参数
LTM4612IV-PBF 制造商:LINER 制造商全称:Linear Technology 功能描述:Ultralow Noise 36VIN, 15VOUT, 5A, DC/DC μModule
LTM4612MPV 制造商:LINER 制造商全称:Linear Technology 功能描述:Ultralow Noise 36VIN, 15VOUT, 5A, DC/DC μModule
LTM4612MPV#PBF 功能描述:IC BUCK SYNC ADJ 5A 133LGA RoHS:是 类别:电源 - 板载 >> DC DC Converters 系列:µModule® 设计资源:VI-200, VI-J00 Design Guide, Appl Manual 标准包装:1 系列:* 类型:隔离 输出数:1 电压 - 输入(最小):66V 电压 - 输入(最大):160V Voltage - Output 1:12V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出(最大):* 电源(瓦) - 制造商系列:50W 电压 - 隔离:* 特点:* 安装类型:通孔 封装/外壳:9-FinMod 尺寸/尺寸:4.60" L x 1.86" W x 0.79" H(116.8mm x 47.2mm x 20.1mm) 包装:散装 工作温度:-25°C ~ 85°C 效率:* 电源(瓦特)- 最大:*
LTM4612MPV-PBF 制造商:LINER 制造商全称:Linear Technology 功能描述:Ultralow Noise 36VIN, 15VOUT, 5A, DC/DC μModule
LTM4612V 制造商:LINER 制造商全称:Linear Technology 功能描述:Ultralow Noise 36VIN, 15VOUT, 5A, DC/DC μModule
LTM4613 制造商:LINER 制造商全称:Linear Technology 功能描述:符合 EN55022B 規格的36VIN、15VOUT、8A、DC/DC μModule 穩壓器,LTM®4613 是一款完整、超低噪聲、8A 開關模式 DC/DC電源。
LTM4613EV#PBF 功能描述:IC DC/DC UMODULE 8A 133-LGA RoHS:是 类别:电源 - 板载 >> DC DC Converters 系列:µModule® 设计资源:VI-200, VI-J00 Design Guide, Appl Manual 标准包装:1 系列:* 类型:隔离 输出数:1 电压 - 输入(最小):66V 电压 - 输入(最大):160V Voltage - Output 1:12V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出(最大):* 电源(瓦) - 制造商系列:50W 电压 - 隔离:* 特点:* 安装类型:通孔 封装/外壳:9-FinMod 尺寸/尺寸:4.60" L x 1.86" W x 0.79" H(116.8mm x 47.2mm x 20.1mm) 包装:散装 工作温度:-25°C ~ 85°C 效率:* 电源(瓦特)- 最大:*
LTM4613EVPBF 制造商:Linear Technology 功能描述:DC/DC Regulator EN55022B 8A 36V Low EMI